Can I hold down the eTap 2x11 shift lever to do a rear multi-shift? December 03, 2019 16:53 Updated Yes. When you let go of the lever the derailleur stops. Related articles Can I program the shift speed? Can you program in automatic rear compensation shifts when making front chainring selections? i.e. shifting to the small ring and simultaneously shifting into a smaller rear cog? Can I set up the SRAM RED eTap 2x11 system to do sequential shifting? Will SRAM make periodic eTap 2x11 firmware updates? Can I customize the shifter paddle or blip operation? E.g. have the left paddle shift up or connect two blips to one shifter and have each blip shift in a different direction? Comments 0 comments Article is closed for comments.