No. SRAM Road Rival DUB crankset spindles are not long enough for Cannondale's Ai spacing.
However, power meter-ready Force AXS-compatible 1x cranksets are available for Cannondale Ai frame spacing...
SRAM offers Quarq power meter spiders to upgrade your current RED or Force AXS crankset easily. To upgrade your RED or Force AXS compatible crankset to a power meter on a Cannondale Ai-spaced frame...
SRAM offers Quarq power meter-ready Force DUB cranksets compatible with Cannondale Ai frame spacing. Follow the steps below to upgrade to an eTap AXS crankset and power meter on your Cannondale Ai ...
Force 43/30 cranksets work with the following bottom bracket standards, when used with a SRAM DUB bottom bracket bearing:
BB30 73-A (Cannondale)
PF30 79-A (BBRI...
No. The Force eTap AXS 43/30 crankset is available in DUB spindle only, and requires the use of a DUB bottom bracket. If you have a frame utilizing BB90, you will need to select an AXS crankset tha...
No. The wide cranksets require additional spacers outside of the bottom bracket bearings. When buying bottom bracket bearings for a wide crankset, look for a “WIDE” suffix in the product descriptio...
No, there is not an available power meter option as the 94mm Bolt Circle Diameter (BCD) of the spider is smaller than the 107mm Force eTap AXS 2x cranksets, to fit the smaller 43/30 chainrings. Qua...
The Force eTap AXS 43/40 crankset has a wider Q-Factor by 5mm than existing Force eTap AXS cranksets (placing each pedal an additional 2.5mm outboard from the bike’s centerline). The change to the ...
Our DUB™ Road platform that is used for our SRAM RED, Force, and Rival eTap AXS™ cranksets is compatible with many of the most common bottom bracket interfaces when used with the appropriate SRAM D...
By shifting the gearing range to the rear, we were able to provide a smoother shift and give the rider the ability to spend more time in the sweet spot of the cassette where the one tooth jumps are...
Yes, in the following manner:
eTap AXS™ shifters
Eagle™ or eTap AXS™ crank
SRAM RED and Force eTap AXS™ chains are only compatible with SRAM RED and Force eTap AXS™...
Absolutely! You can order a SRAM AXS™ Power Meter Spider from Quarq. It is designed to use your existing Force AXS™ crankarms and chainrings, and can be installed without a factory calibration.