• Installation - Hose Won't Thread Onto Fork/Shock plus icon minus icon
  • Symptom Definition:  The ShockWiz hose will not fully thread onto the fork or shocks air inflation valve stem. The hose coupler engages 1-2 threads and will not thread on any further. Cause:  The O... See more
  • Installation - Hose Does Not Engage Valve Core plus icon minus icon
  • Symptom Description: When the ShockWiz hose is fully installed it does not depress the Schrader valve pin of the fork or shock’s inflation valve and the valve remains closed. As a result, changes i... See more
  • C-Clip Failure - Coupler Has Detached From Hose plus icon minus icon
  • Symptom Description: The threaded hose coupler on the ShockWiz hose detaches from the hose. See attached pictured.  Cause:  The cir-clip responsible for holding the threaded coupler to the hose was... See more
  • Air Leak - ShockWiz Hose Leaks Air plus icon minus icon
  • Symptom Description: Air is leaking from the ShockWiz hose. Cause:  An o-ring within one of the hose coupler has failed, or the hose itself is compromised. Troubleshooting 1) Install ShockWiz onto ... See more
  • Air Flow - Hose Is Obstructed plus icon minus icon
  • Symptom Description: A ShockWiz hose is obstructed to the point that very little air, or no air at all, can flow through the hose. It will be very difficult, or impossible, to inflate or deflate th... See more