The Eagle 90 Transmission derailleur is the strongest mechanical derailleur we have ever produced and the most rebuildable derailleur in the Eagle Transmission Ecosystem.
See more
The Eagle 90 Transmission derailleur uses a Full Mount design and can only be used on frames that have a Hangerless (also known as UDH) Interface.
See more
Like Eagle AXS Transmission, Eagle 90 follows the simple Prepare-Hang-Tighten sequence, with the addition of fourth key step: Routing for the cable and housing.
See more
As the most rebuildable derailleur in the Transmission Ecosystem, the Eagle 90 Transmission derailleur features replaceable outer and inner parallelogram links, skid plates, B-knuckle, and a tool-f...
See more
The Eagle 70 Transmission derailleur brings strength and dependability to any UDH compatible bike as the bedrock of the cable-actuated Eagle Transmission shift experience.
See more
The Eagle 70 Transmission derailleur body features a replaceable outer parallelogram link and skid plates. There is no replacement cage or cage assembly specific to Eagle 70, but the cage and cage ...
See more
The Eagle 90 Transmission derailleur uses the Type 4 damper as found on GX, XO, and XX Transmission derailleurs. The Eagle 70 Transmission uses a new drag spring damper, featuring higher damper out...
See more
Yes, the Eagle 90 and 70 Transmission derailleurs share the same "In-Line" geometry as other Eagle AXS Transmission derailleurs and are and fully cross compatible.
See more
Eagle 90 series chainrings are offered in 30t, 32t, and 34t sizes, but you can also use 8-bolt 3mm offset T-Type chainrings from the GX, X0, XX, and XX SL series in the same sizes, as well as 36t a...
See more
The Eagle 90 Transmission crankset may come with two, one, or without bashguards when included on a complete bike. If your crankset comes with bashguards, they are the same bashguards found on the ...
See more
The 8-bolt interface found on the Eagle 90 Transmission crankset is compatible with the XX SL Eagle AXS Transmission Power Meter. There is no spindle-based power meter variant.
See more
The Eagle 70 Transmission crankset is compatible with our 3mm offset, steel, direct mount, 3-bolt, T-Type chainrings.
11.6218.069.000 - 30t
11.6218.069.001 - 32t
11.6218.069.002 - 34t
See more
The Eagle 70 Transmission crankset may come with two, one, or without bashguards when included on a complete bike. If your crankset comes with bashguards, they are the same bashguards found on the ...
See more
Yes! Our Eagle 90 Transmission E-MTB crank assembly is made from forged aluminum and available for SRAM Powertrain, Brose, or Bosch (including the Bosch CX BDU38) system equipped bikes. The removab...
See more
Replacement silver Eagle 90 T-Type chainrings, made from stamped steel and featuring an 8-bolt interface, are available in 30t, 32t, and 34t. They have a 3mm offset and are compatible with T-Type c...
See more
Black direct mount chainrings, made from stamped steel and featuring a 3-bolt interface, are available in 30t, 32t, and 34t. They have a 3mm offset and are compatible with T-Type chains.
See more
Yes, the 3-bolt black direct mount Eagle Transmission T-Type chainrings are compatible with 3-bolt Eagle Drivetrain crankarms that feature a DUB Wide spindle for 55mm chainline optimization.
See more