Available on June 17th, 2025, the Force XPLR AXS product line includes the Force XPLR AXS rear derailleur, the Force XPLR AXS power meter, the Force XPLR crankset, and the Force XPLR XG-1371 casset...
See more
The Force AXS chain is compatible with 12-speed road and 13-speed XPLR AXS groupsets. It is also available in purple. All road Flattop D1 and E1 chains are compatible. Please note that Eagle Transm...
See more
The Force XPLR crankset is light and stiff with direct mount chainrings and can be upgraded to a power meter. With a DUB bottom bracket and 8-bolt interface, the Force XPLR crankset is available in...
See more
The XG-1371 cassette is a 1x 13-speed cassette with a 10-46T range, to be used with the XPLR 1x 13-speed derailleur. The tooth progression of the cassette is 10-11-12-13-15-17-19-21-24-28-32-38-46.
See more
The Force XPLR AXS rear derailleur provides superior chain management and is simple to set up with no adjustment screws. Hangerless Interface and Full Mount attachment allow for ultimate resistance...
See more
The Force XPLR AXS rear derailleur has many replaceable and rebuildable parts, such as the cage assembly, pulley wheels, upper and lower outer parallelogram, Full Mount, and battery latch.
See more
If a Force XPLR AXS rear derailleur is removed and reinstalled, the installation procedures for installing the rear derailleur, the wheel, and the thru axle will need to be completed. Ensure the re...
See more
The pulley set from Transmission derailleurs and the battery latch from the GX Transmission rear derailleur are interchangeable with the FORCE XPLR AXS rear derailleur. These are the only parts of ...
See more
Yes, the Full Mount on your Force XPLR AXS derailleur is designed to rotate in the event of frontal impact, moving your derailleur away from danger and allowing it to be reset after impact.
See more
Gravel bike frames with a UDH capable dropout interface are compatible with SRAM Force XPLR AXS. Chainstay lengths down to 415mm are endorsed with 47.5 mm chainline. Force XPLR AXS can be used on b...
See more
Prepare. Hang. Tighten. The Full Mount derailleur can be installed in three simple steps with no special tools required. See our Prepare. Hang. Tighten. video to learn more.
See more
A Full Mount derailleur mounts to frames that use the UDH interface. By centering on the wheel axle, we can create a system that has no weak points upon impact. Its consistent location relative to ...
See more
UDH, or Universal Derailleur Hanger, refers to a universal design of derailleur hanger that can be used across supporting brands and works with traditional rear derailleur mounting styles. Frames d...
See more
To correctly size the chain on your Force XPLR system, refer to the chart in the Road User Manual or to the Full Mount Chain Length Guide. To provide your appropriate chain length using either of t...
See more
Some scenarios may require a change. Please refer to the Full Mount Chain Length Guide or User Manual to verify chain length when changing your chainring size.
See more