General

Level | Guide | G2 | Code

• How do I identify the brake pad compound used on my SRAM brakes?
There are quite a few different brake pad options for SRAM brakes. Our SRAM Brake Pad Overview can help you to identify what brake pads you have and what options are available to you.    TECH TIP: ... See more
• Are the SRAM Stealth-a-majig hose barb and compression fitting compatible with my older SRAM brake?
Yes. The new hose barb and compression fitting are backward compatible. Please be aware that the old-style fittings are not forward compatible and won't open the Stealthamajig valve to allow fluid ... See more
• Can I use SRAM hydraulic brakes on my tandem bike?
No. SRAM hydraulic disc brakes are not approved for use on tandem bicycles because of the total system weight, including riders, and the need for a longer rear hydraulic hose than is tested and app... See more
• Where can I find the serial number of my SRAM brake?
The serial number of all our Level, Guide, G2, and Code models is located on the bottom of your brake caliper right between the post mounts.   Reference our serial number location guide for detail... See more
• Are SRAM MTB brake levers specific for right and left hand operation?
No. SRAM mountain bike brake levers are ambidextrous, meaning a lever can be mounted to either the left or right side of your handlebar. However, you can purchase our brakes with either 950mm hose ... See more
• Is SRAM offering Flat Mount MTB brakes?
No. Currently, there are no Flat Mount MTB brakes available for aftermarket purchase. However, it is possible to pair some of our road calipers with MTB levers. Here you can find our MTB and Road h... See more
• Do SRAM MTB DOT brakes come with a bleed kit?
No. The bleed kit must be purchased separately. We offer a basic version (#00.5318.016.000) and a Pro version (#00.5318.016.002). The difference between the two is that the pro kit comes with highe... See more
• What type of brake fluid is used in SRAM hydraulic DOT brake systems?
DOT 5.1 or DOT 4 brake fluid is used in all current SRAM brake systems, including Level, Guide, G2, and Code series. Need to bleed your brakes? Four-ounce bottles of SRAM DOT 5.1 fluid are availabl... See more
• Why does my SRAM brake hose have a silver fitting installed if the provided spare is red?
Factory OE (original equipment) brake assemblies may have silver fittings installed. However, aftermarket replacement fittings are anodized red. All SRAM hose barb and compression fittings should b... See more
• Are there spare o-rings available for SRAM DOT bleed kits?
Yes. You can order these via your local dealer using part number 11.5315.053.040. Hose kits are also available for the pro bleed kit with part number 11.5378.804.000. See more
• What is the difference between DOT 4 and 5.1?
DOT 5.1 brake fluid has a higher boiling point of 260°C compared to 230°C DOT4 offers, it will improve the performance of your braking system. See more
• Can I mix SRAM MTB brake levers and calipers?
Yes. Find out which lever fits which caliper, using the lever and caliper compatibility chart.   TECH TIP: Brake models within the same series are cross-compatible. For example, all G2 brake levers... See more
• What's the difference between the brake pad materials SRAM offers?
We offer brake pads made from organic or sintered compounds for all our Level, Guide, G2, and Code models. Choose your brake pad based on your preference and riding conditions. Sintered Brake Pads ... See more
• Which brake pad compound comes stock with SRAM MTB brakes?
Code models come with sintered pads and G2, Guide, and Level models are originally equipped with organic pads. However, some bike manufacturers equip their bikes with different compounds. In order ... See more
• Why are bleed blocks necessary when bleeding SRAM brakes?
The correct bleed block sets your caliper pistons at the perfect starting point, which ensures the correct amount of fluid is in your brake system. If the brakes are bled without a bleed block, you... See more