Yes, SRAM also offers the cage and pulley assembly without the damper assembly. This process is a little more involved, but is well documented in the manual here. There are two options available: a...
See more
Replacing the cage and damper assembly on Eagle Transmission is easier than you might think! You can see the images below or reference the manual here for information on this process. You can also ...
See more
Yes, a replacement kit of the 10T-18T cogs for the XS-1270 cassette will be available, with the 10T, 12T, 14T, and 16T cogs in a welded cluster and the 18T cog separate.
See more
In most cases, yes. Eagle Transmission rear derailleurs are designed to have replaceable points of frequent contact: the skid plate, the outer parallelogram link, as well as the cage and damper ass...
See more
In most cases, yes. The skid plates are interchangeable between XX SL, XX, and X0 Eagle Transmission derailleurs. The outer parallelogram links are also replaceable and interchangeable between XX S...
See more
The S-1000 Eagle Transmission derailleur has replaceable skid plates, a two-piece outer link, and a removable cage assembly that rotates off allowing you to rebuild your derailleur when necessary. ...
See more
Use your finger or a coin to turn the battery cover counterclockwise to open the battery compartment. Remove the cover, remove the battery, and then insert a new CR 2032 battery with the positive (...
See more
Eagle Transmission uses the same tools as Eagle Drivetrain, AXS road, or 11-speed chains. You can see the complete list of approved tools here.
See more
The Transmission Pod controller is available in two versions, the standard and Ultimate models. The Ultimate comes with two types of button covers that you can change easily following the informati...
See more
You should periodically clean your electronic components by using a damp cloth to wipe off any dirt and debris. Clean the components with mild soap and water only. Rinse thoroughly with water and a...
See more