Setup and Service

Level | Guide | G2 | Code

• Which is the right brake pad for my SRAM MTB brake?
Here you can find our Pad Identification Guide which also explains the difference between the various compounds SRAM offers. TECH TIP: Please make sure to change the rotor when you are changing to ... See more
• How do I shorten my SRAM MTB DOT brakes hose?
The hose shortening procedure can be found in your brake´s service manual, or on our SRAM TECH YouTube channel. See more
• Can I bleed my SRAM brakes without the indicated bleed block?
No. In order to get the correct setting for your caliper pistons and the amount of fluid in the system, you must use the correct Bleed Block for your Level, Guide, G2, or Code brake model. These ar... See more
• Can I use alternative brake fluids in my SRAM DOT hydraulic disc brakes?
No. Using any fluid that is not DOT 4 or DOT 5.1 brake fluid will contaminate your brake system, causing damage to the internal seals and requiring the replacement of the complete brake. Using any ... See more
• How often should I bleed my SRAM DOT brakes?
Bleed your brakes at least once a year to ensure optimal braking performance, or more frequently as needed. If you ride frequently or regularly ride aggressive terrain, it is recommended to bleed y... See more
• Can I use DOT 5 in my SRAM DOT brakes?
No. DOT 5 is a silicone-based fluid that is not compatible with SRAM brakes. Using DOT 5 brake fluid will damage the internals of your brake system. Using any fluid other than DOT 4 or 5.1 will voi... See more
• When should my SRAM brake pads be replaced?
Inspect disc brake pads for wear every month or more frequently when riding in sandy or dirty conditions. When the total thickness of the backing plate and pad material is 3 mm or less, they are wo... See more
• Can I use other manufacturer's DOT fluid in my SRAM DOT brakes?
Yes. However, you may only use DOT 4 and DOT 5.1 brake fluid in SRAM hydraulic disc brakes. DOT brake fluid is produced within the FMVSS (Federal Motor Vehicle Safety Standards) so you can choose b... See more
• What is the bed-in procedure for SRAM brakes?
When SRAM mountain bike brake pads and rotors are new, they must be “bed-in” before they reach their full braking potential. The idea behind brake bed-in is to increase friction between pads and ro... See more
• How do I bleed my SRAM DOT brakes?
To put it simply, bleeding the brakes is the process of pushing fluid through a hydraulic brake system to ensure all air bubbles and moisture are removed and fluid is refreshed. If brakes aren't bl... See more
• Can I shorten a SRAM brake line without having to bleed the brake?
No. Brakes must be bled after shortening the hose because you are opening a closed hydraulic system to air exposure. Air in the hydraulic line can lead to inconsistent performance, injury or even d... See more
• What is the correct SRAM brake mounting adapter for my bike?
To determine the right brake adapter for your setup please refer to our Caliper Mounting Specifications. See more
• How do I change my SRAM DOT brake pads?
You can find a pad replacement description in your brake´s manual, or on our SRAM TECH YouTube channel.   See more
• Which is the right bleed block for my SRAM DOT brake?
You can find a list of Bleed Blocks and Pad Spacers for your specific model in our Brake Bleed manual. See more
• How do I mount the new SRAM DOT brake hose compression fittings the right way?
RIGHT   WRONG     For more detailed information please refer to our MTB Disc Brake Hose Shortening and Bleed Manual. See more
• Are my SRAM DOT mountain bike brake levers adjustable?
One way to check the adjustability of your SRAM DOT mountain bike brake levers is the model code abbreviation found on the brake lever itself. The letters "R", and "C" in the model code indicate th... See more
• Where can I find SRAM MTB DOT brake spare parts?
Spare parts can be found in our Spare Parts Catalog and ordered from your preferred bike shop. If you need assistance finding spare parts, please contact our Rider Support Team for help. See more