You can optimize derailleur shift performance and eliminate unwanted rasping sounds by fine-tuning the derailleur position with Micro-Adjust using the AXS app or the Pod Controller. The Micro-Adjust process for Eagle Transmission is the same as other AXS systems.
The easiest way to Micro-Adjust is using the AXS App by following the steps shown in the video below:
You can also Micro-Adjust using the Pod Controller (or other AXS Controller):
1. Press and hold the controller AXS button while pressing the lower controller button (1b). This will move the derailleur 0.2 mm inboard and improve shifting to an inboard cog.
2. Press and hold the controller AXS button while pressing the upper controller button (2c) to adjust the derailleur outboard. This will move the derailleur 0.2 mm outboard and improve shifting to an outboard cog.
The derailleur may not appear to move, watch for the LED to blink to confirm the derailleur executed the command.
Please note that if you have customized which shift buttons moves the Transmission Derailleur inboard or outboard using in the AXS app, the Micro-Adjust process will follow the customized pattern.
Note: MicroAdjust affects position across all of the cogs. There is no independent adjustment for each cog.