With one hand on the bar and one hand turning the crank, it can be hard to execute a front shift, unless you stop turning the crank. To solve this, there is a button on our front derailleur that is used to execute a shift that can be pressed with one hand while you turn the crank with the other hand. It is the same button used for the pairing procedure.
Articles in this section
- Can I adjust RED eTap 2x11 brake levers reach?
- Do I need to do anything different when washing a bike with SRAM RED eTap?
- Are common bike washes safe to use on SRAM RED eTap?
- Are there any recommended degreasers I should use with SRAM RED eTap?
- Can I use a pressure washer when cleaning my SRAM RED eTap groupset?
- How hard is it to pair the RED eTap 2x11 system and get all of the components to recognize each other?
- How do I shift the front derailleur when I am tuning it in the workstand?
- How far does the derailleur index when adjusting the eTap 2x11 rear derailleur trim?
- Can I adjust the Red eTap 2x11 derailleurs from the levers while I am riding, like you can with a barrel adjuster on a mechanical system?
- Can I set up the SRAM RED eTap 2x11 system to do sequential shifting?